feat: add Linux support with cross-platform memory scanning

- Add Linux memory scanner (`find_all_keys_linux.py`) using `/proc/<pid>/mem`,
  same approach as Windows/macOS — no GDB, no function offsets, no restart needed
- Extract Windows-specific code to `find_all_keys_windows.py`
- Make `find_all_keys.py` a platform dispatcher (Windows / Linux)
- Add `key_utils.py` for cross-platform path matching (`/` vs `\` in all_keys.json)
- Update `config.py` with Linux auto-detection of db_storage paths
- Update all consumers (decrypt_db, monitor, monitor_web, mcp_server) to use
  `get_key_info()` for platform-agnostic key lookup

Tested on remote Linux container: 15/15 DBs scanned, decrypted, and verified.

README.md

@@ -1,6 +1,6 @@
-# WeChat 4.0 Database Decryptor
+# WeChat 4.x Database Decryptor
 
-微信 4.0 (Windows) 本地数据库解密工具。从运行中的微信进程内存提取加密密钥，解密所有 SQLCipher 4 加密数据库，并提供实时消息监听。
+微信 4.0 (Windows、MacOS、Linux) 本地数据库解密工具。从运行中的微信进程内存提取加密密钥，解密所有 SQLCipher 4 加密数据库，并提供实时消息监听。
 
 ## 更新日志
 
@@ -21,33 +21,46 @@
 - **页面大小**: 4096 bytes, reserve = 80 (IV 16 + HMAC 64)
 - **每个数据库有独立的 salt 和 enc_key**
 
-WCDB (微信的 SQLCipher 封装) 会在进程内存中缓存派生后的 raw key，格式为 `x'<64hex_enc_key><32hex_salt>'`。本工具通过扫描进程内存中的这种模式，匹配数据库文件的 salt，并通过 HMAC 验证来提取正确的密钥。
+WCDB (微信的 SQLCipher 封装) 会在进程内存中缓存派生后的 raw key，格式为 `x'<64hex_enc_key><32hex_salt>'`。三个平台（Windows / Linux / macOS）均可通过扫描进程内存匹配此模式，再通过 HMAC 校验 page 1 确认密钥正确性。
 
 ## 使用方法
 
 ### 环境要求
 
-- Windows 10/11
 - Python 3.10+
-- 微信 4.0 (正在运行)
+- 微信 4.x
-- 需要管理员权限 (读取进程内存)
+- `pip install pycryptodome`
+
+Windows：
+
+- Windows 10/11
+- 微信正在运行
+- 需要管理员权限（读取进程内存）
+
+Linux：
+
+- 64-bit Linux
+- 需要 root 权限或 `CAP_SYS_PTRACE`（读取 `/proc/<pid>/mem`）
+- `db_dir` 默认类似 `~/Documents/xwechat_files/<wxid>/db_storage`
 
 ### 安装依赖
 
-```bash
-pip install pycryptodome
-```
-
 ### 快速开始
 
-确保微信正在运行，以**管理员权限**执行：
+Windows：
 
 ```bash
-python main.py            # 实时消息监听 (Web UI)
+python main.py
-python main.py decrypt    # 解密全部数据库到 decrypted/
+python main.py decrypt
 ```
 
-程序会自动完成：配置检测 → 密钥提取 → 启动。首次运行会自动检测微信数据目录并生成 `config.json`。
+Linux：
+
+```bash
+python3 main.py decrypt
+```
+
+程序会自动完成：配置检测 → 内存扫描提取密钥 → 解密。首次运行会自动检测微信数据目录并生成 `config.json`。微信只要在运行中即可，无需重启或重新登录。
 
 如果自动检测失败（例如微信安装在非默认位置），手动创建 `config.json`：
 ```json
@@ -59,7 +72,18 @@ python main.py decrypt    # 解密全部数据库到 decrypted/
 }
 ```
 
-`db_dir` 路径可以在 微信设置 → 文件管理 中找到。
+Linux 版 `config.json` 示例：
+
+```json
+{
+    "db_dir": "/home/yourname/Documents/xwechat_files/your_wxid/db_storage",
+    "keys_file": "all_keys.json",
+    "decrypted_dir": "decrypted",
+    "wechat_process": "wechat"
+}
+```
+
+`db_dir` 路径：Windows 可在微信设置 → 文件管理中找到；Linux 默认在 `~/Documents/xwechat_files/<wxid>/db_storage`。
 
 ### Web UI 说明
 
@@ -130,36 +154,15 @@ python find_image_key.py
 
 > **注意**: AES 密钥仅在微信查看图片时临时加载到内存中。如果扫描未找到密钥，请先在微信中查看几张图片，然后立即重新运行脚本。
 
-#### macOS 图片解密
-
-macOS 上使用 C 版工具（通过 Mach VM API + CommonCrypto，性能比 Python 高 100 倍）：
-
-**前置条件：**
-- Xcode Command Line Tools: `xcode-select --install`
-- 微信需要 ad-hoc 签名：`sudo codesign --force --deep --sign - /Applications/WeChat.app`
-- 开发者模式：系统设置 → 隐私与安全 → 开发者模式 → 开启
-
-```bash
-# 编译
-cc -O3 -o find_image_key find_image_key.c -framework Security
-cc -O3 -o decrypt_images decrypt_images.c -framework Security
-
-# 1. 持续扫描图片密钥（在微信中浏览图片，扫描器自动捕获密钥）
-sudo ./find_image_key
-
-# 2. 批量解密所有 V2 图片
-./decrypt_images
-```
-
-`find_image_key` 会自动发现所有未解密的 V2 图片 pattern，持续扫描微信进程内存。当用户在微信中浏览图片时捕获密钥，保存到 `image_keys.json`。支持 `--deep` 模式进行逐字节深度扫描。
-
 ## 文件说明
 
 | 文件 | 说明 |
 |------|------|
 | `main.py` | **一键启动入口** — 自动配置、提取密钥、启动服务 |
 | `config.py` | 配置加载器（自动检测微信数据目录） |
-| `find_all_keys.py` | 从微信进程内存提取所有数据库密钥 |
+| `find_all_keys.py` | 平台分发入口（Windows / Linux） |
+| `find_all_keys_windows.py` | Windows 版内存扫描提 key |
+| `find_all_keys_linux.py` | Linux 版内存扫描提 key |
 | `decrypt_db.py` | 全量解密所有数据库 |
 | `mcp_server.py` | MCP Server，让 Claude AI 查询微信数据 |
 | `monitor_web.py` | 实时消息监听 (Web UI + SSE + 图片预览) |
@@ -169,8 +172,6 @@ sudo ./find_image_key
 | `find_image_key_monitor.py` | 持续监控版密钥提取（推荐） |
 | `latency_test.py` | 延迟测量诊断工具 |
 | `find_all_keys_macos.c` | macOS 版内存密钥扫描器 (C, Mach VM API) |
-| `find_image_key.c` | macOS 版图片密钥扫描器 (C, 持续监控模式) |
-| `decrypt_images.c` | macOS 版批量图片解密器 (C, 多密钥支持) |
 
 ## 技术细节
 
@@ -204,6 +205,7 @@ V2 文件结构: `[6B signature] [4B aes_size LE] [4B xor_size LE] [1B padding]`
 
 ## macOS 数据库密钥扫描 (WeChat 4.x)
 
+
 macOS 版微信 4.x 使用 SQLCipher 4 加密本地数据库，密钥格式为 `x'<64hex_key><32hex_salt>'`。C 版扫描器通过 Mach VM API 扫描微信进程内存提取密钥。
 
 ### 前置条件

config.py

@@ -5,23 +5,54 @@
 import glob
 import json
 import os
+import platform
 import sys
 
 CONFIG_FILE = os.path.join(os.path.dirname(os.path.abspath(__file__)), "config.json")
 
-_DEFAULT_TEMPLATE_DIR = r"D:\xwechat_files\your_wxid\db_storage"
+_SYSTEM = platform.system().lower()
+_DEFAULT_TEMPLATE_DIR = (
+    os.path.expanduser("~/Documents/xwechat_files/your_wxid/db_storage")
+    if _SYSTEM == "linux"
+    else r"D:\xwechat_files\your_wxid\db_storage"
+)
 
 _DEFAULT = {
     "db_dir": _DEFAULT_TEMPLATE_DIR,
     "keys_file": "all_keys.json",
     "decrypted_dir": "decrypted",
     "decoded_image_dir": "decoded_images",
-    "wechat_process": "Weixin.exe",
+    "wechat_process": "wechat" if _SYSTEM == "linux" else "Weixin.exe",
 }
 
 
-def auto_detect_db_dir():
+def _choose_candidate(candidates):
-    """从微信本地配置自动检测 db_storage 路径。
+    """在多个候选目录中选择一个。"""
+    if len(candidates) == 1:
+        return candidates[0]
+    if len(candidates) > 1:
+        if not sys.stdin.isatty():
+            return candidates[0]
+        print("[!] 检测到多个微信数据目录（请选择当前正在运行的微信账号）:")
+        for i, c in enumerate(candidates, 1):
+            print(f"    {i}. {c}")
+        print("    0. 跳过，稍后手动配置")
+        try:
+            while True:
+                choice = input("请选择 [0-{}]: ".format(len(candidates))).strip()
+                if choice == "0":
+                    return None
+                if choice.isdigit() and 1 <= int(choice) <= len(candidates):
+                    return candidates[int(choice) - 1]
+                print("    无效输入，请重新选择")
+        except (EOFError, KeyboardInterrupt):
+            print()
+            return None
+    return None
+
+
+def _auto_detect_db_dir_windows():
+    """从微信本地配置自动检测 Windows db_storage 路径。
 
     读取 %APPDATA%\\Tencent\\xwechat\\config\\*.ini，
     找到数据存储根目录，然后匹配 xwechat_files\\*\\db_storage。
@@ -62,27 +93,55 @@ def auto_detect_db_dir():
                 seen.add(normalized)
                 candidates.append(match)
 
-    if len(candidates) == 1:
+    return _choose_candidate(candidates)
-        return candidates[0]
+
-    if len(candidates) > 1:
+
-        # 非交互环境（MCP、无 stdin 管道等）直接取第一个
+def _auto_detect_db_dir_linux():
-        if not sys.stdin.isatty():
+    """自动检测 Linux 微信 db_storage 路径。"""
-            return candidates[0]
+    seen = set()
-        print("[!] 检测到多个微信数据目录（请选择当前正在运行的微信账号）:")
+    candidates = []
-        for i, c in enumerate(candidates, 1):
+    search_roots = {
-            print(f"    {i}. {c}")
+        os.path.expanduser("~/Documents/xwechat_files"),
-        print("    0. 跳过，稍后手动配置")
+    }
+
+    if os.path.isdir("/home"):
+        for entry in os.listdir("/home"):
+            search_roots.add(os.path.join("/home", entry, "Documents", "xwechat_files"))
+
+    for root in search_roots:
+        if not os.path.isdir(root):
+            continue
+        pattern = os.path.join(root, "*", "db_storage")
+        for match in glob.glob(pattern):
+            normalized = os.path.normcase(os.path.normpath(match))
+            if os.path.isdir(match) and normalized not in seen:
+                seen.add(normalized)
+                candidates.append(match)
+
+    old_path = os.path.expanduser("~/.local/share/weixin/data/db_storage")
+    if os.path.isdir(old_path):
+        normalized = os.path.normcase(os.path.normpath(old_path))
+        if normalized not in seen:
+            candidates.append(old_path)
+
+    # Linux 优先使用最近活跃账号：按 message 目录 mtime 降序
+    def _mtime(path):
+        msg_dir = os.path.join(path, "message")
+        target = msg_dir if os.path.isdir(msg_dir) else path
         try:
-            while True:
+            return os.path.getmtime(target)
-                choice = input("请选择 [0-{}]: ".format(len(candidates))).strip()
+        except OSError:
-                if choice == "0":
+            return 0
-                    return None
+
-                if choice.isdigit() and 1 <= int(choice) <= len(candidates):
+    candidates.sort(key=_mtime, reverse=True)
-                    return candidates[int(choice) - 1]
+    return _choose_candidate(candidates)
-                print("    无效输入，请重新选择")
+
-        except (EOFError, KeyboardInterrupt):
+
-            print()
+def auto_detect_db_dir():
-            return None
+    if _SYSTEM == "windows":
+        return _auto_detect_db_dir_windows()
+    if _SYSTEM == "linux":
+        return _auto_detect_db_dir_linux()
     return None
 
 
@@ -95,6 +154,7 @@ def load_config():
         except json.JSONDecodeError:
             print(f"[!] {CONFIG_FILE} 格式损坏，将使用默认配置")
             cfg = {}
+    cfg = {**_DEFAULT, **cfg}
 
     # db_dir 缺失或仍为模板值时，尝试自动检测
     db_dir = cfg.get("db_dir", "")
@@ -110,10 +170,13 @@ def load_config():
         else:
             if not os.path.exists(CONFIG_FILE):
                 with open(CONFIG_FILE, "w") as f:
-                    json.dump(_DEFAULT, f, indent=4)
+                    json.dump(_DEFAULT, f, indent=4, ensure_ascii=False)
             print(f"[!] 未能自动检测微信数据目录")
             print(f"    请手动编辑 {CONFIG_FILE} 中的 db_dir 字段")
-            print(f"    路径可在 微信设置 → 文件管理 中找到")
+            if _SYSTEM == "linux":
+                print("    Linux 默认路径类似: ~/Documents/xwechat_files/<wxid>/db_storage")
+            else:
+                print(f"    路径可在 微信设置 → 文件管理 中找到")
             sys.exit(1)
 
     # 将相对路径转为绝对路径

decrypt_db.py

@@ -21,6 +21,7 @@ RESERVE_SZ = 80  # IV(16) + HMAC(64)
 SQLITE_HDR = b'SQLite format 3\x00'
 
 from config import load_config
+from key_utils import get_key_info, strip_key_metadata
 _cfg = load_config()
 DB_DIR = _cfg["db_dir"]
 OUT_DIR = _cfg["decrypted_dir"]
@@ -118,7 +119,7 @@ def main():
     with open(KEYS_FILE) as f:
         keys = json.load(f)
 
-    keys.pop("_db_dir", None)
+    keys = strip_key_metadata(keys)
     print(f"\n加载 {len(keys)} 个数据库密钥")
     print(f"输出目录: {OUT_DIR}")
     os.makedirs(OUT_DIR, exist_ok=True)
@@ -129,7 +130,7 @@ def main():
         for f in files:
             if f.endswith('.db') and not f.endswith('-wal') and not f.endswith('-shm'):
                 path = os.path.join(root, f)
-                rel = os.path.relpath(path, DB_DIR).replace('\\', '/')
+                rel = os.path.relpath(path, DB_DIR)
                 sz = os.path.getsize(path)
                 db_files.append((rel, path, sz))
 
@@ -142,14 +143,13 @@ def main():
     total_bytes = 0
 
     for rel, path, sz in db_files:
-        # 统一用正斜杠查找key
+        key_info = get_key_info(keys, rel)
-        rel_key = rel.replace('\\', '/')
+        if not key_info:
-        if rel_key not in keys:
             print(f"SKIP: {rel} (无密钥)")
             failed += 1
             continue
 
-        enc_key = bytes.fromhex(keys[rel_key]["enc_key"])
+        enc_key = bytes.fromhex(key_info["enc_key"])
         out_path = os.path.join(OUT_DIR, rel)
 
         print(f"解密: {rel} ({sz/1024/1024:.1f}MB) ...", end=" ")

find_all_keys.py

@@ -1,275 +1,29 @@
-"""
+import platform
-从微信进程内存中提取所有数据库的缓存raw key
+import sys
 
-WCDB为每个DB缓存: x'<64hex_enc_key><32hex_salt>'
-salt嵌在hex字符串中，可以直接匹配DB文件的salt
-"""
-import ctypes
-import ctypes.wintypes as wt
-import struct, os, sys, hashlib, time, re, json
-import hmac as hmac_mod
-from Crypto.Cipher import AES
 
-import functools
+def _load_impl():
-print = functools.partial(print, flush=True)
+    system = platform.system().lower()
+    if system == "windows":
+        import find_all_keys_windows as impl
+        return impl
+    if system == "linux":
+        import find_all_keys_linux as impl
+        return impl
+    raise RuntimeError(f"当前平台暂不支持通过 find_all_keys.py 提取密钥: {platform.system()}")
 
-kernel32 = ctypes.windll.kernel32
-MEM_COMMIT = 0x1000
-READABLE = {0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80}
-PAGE_SZ = 4096
-KEY_SZ = 32
-SALT_SZ = 16
-
-from config import load_config
-_cfg = load_config()
-DB_DIR = _cfg["db_dir"]
-OUT_FILE = _cfg["keys_file"]
-
-class MBI(ctypes.Structure):
-    _fields_ = [
-        ("BaseAddress", ctypes.c_uint64), ("AllocationBase", ctypes.c_uint64),
-        ("AllocationProtect", wt.DWORD), ("_pad1", wt.DWORD),
-        ("RegionSize", ctypes.c_uint64), ("State", wt.DWORD),
-        ("Protect", wt.DWORD), ("Type", wt.DWORD), ("_pad2", wt.DWORD),
-    ]
 
 def get_pids():
-    """返回所有 Weixin.exe 进程的 (pid, mem_kb) 列表，按内存降序"""
+    return _load_impl().get_pids()
-    import subprocess
-    r = subprocess.run(["tasklist","/FI","IMAGENAME eq Weixin.exe","/FO","CSV","/NH"],
-                       capture_output=True, text=True)
-    pids = []
-    for line in r.stdout.strip().split('\n'):
-        if not line.strip(): continue
-        p = line.strip('"').split('","')
-        if len(p)>=5:
-            pid=int(p[1]); mem=int(p[4].replace(',','').replace(' K','').strip() or '0')
-            pids.append((pid, mem))
-    if not pids: raise RuntimeError("Weixin.exe 未运行")
-    pids.sort(key=lambda x: x[1], reverse=True)
-    for pid, mem in pids:
-        print(f"[+] Weixin.exe PID={pid} ({mem//1024}MB)")
-    return pids
-
-def read_mem(h, addr, sz):
-    buf = ctypes.create_string_buffer(sz)
-    n = ctypes.c_size_t(0)
-    if kernel32.ReadProcessMemory(h, ctypes.c_uint64(addr), buf, sz, ctypes.byref(n)):
-        return buf.raw[:n.value]
-    return None
-
-def enum_regions(h):
-    regs = []
-    addr = 0
-    mbi = MBI()
-    while addr < 0x7FFFFFFFFFFF:
-        if kernel32.VirtualQueryEx(h, ctypes.c_uint64(addr), ctypes.byref(mbi), ctypes.sizeof(mbi))==0: break
-        if mbi.State==MEM_COMMIT and mbi.Protect in READABLE and 0<mbi.RegionSize<500*1024*1024:
-            regs.append((mbi.BaseAddress, mbi.RegionSize))
-        nxt = mbi.BaseAddress + mbi.RegionSize
-        if nxt<=addr: break
-        addr = nxt
-    return regs
-
-def verify_key_for_db(enc_key, db_page1):
-    """验证enc_key是否能解密这个DB的page 1"""
-    salt = db_page1[:SALT_SZ]
-    iv = db_page1[PAGE_SZ - 80 : PAGE_SZ - 64]
-    encrypted = db_page1[SALT_SZ : PAGE_SZ - 80]
-
-    # HMAC验证 (最可靠)
-    mac_salt = bytes(b ^ 0x3a for b in salt)
-    mac_key = hashlib.pbkdf2_hmac("sha512", enc_key, mac_salt, 2, dklen=KEY_SZ)
-    hmac_data = db_page1[SALT_SZ : PAGE_SZ - 80 + 16]
-    stored_hmac = db_page1[PAGE_SZ - 64 : PAGE_SZ]
-    h = hmac_mod.new(mac_key, hmac_data, hashlib.sha512)
-    h.update(struct.pack('<I', 1))
-    return h.digest() == stored_hmac
 
 
 def main():
-    print("=" * 60)
+    return _load_impl().main()
-    print("  提取所有微信数据库密钥")
-    print("=" * 60)
-
-    # 1. 收集所有DB文件及其salt
-    db_files = []
-    salt_to_dbs = {}  # salt_hex -> [(rel_path, db_page1), ...]
-
-    for root, dirs, files in os.walk(DB_DIR):
-        for f in files:
-            if f.endswith('.db') and not f.endswith('-wal') and not f.endswith('-shm'):
-                path = os.path.join(root, f)
-                rel = os.path.relpath(path, DB_DIR).replace('\\', '/')
-                sz = os.path.getsize(path)
-                if sz < PAGE_SZ:
-                    continue
-                with open(path, 'rb') as fh:
-                    page1 = fh.read(PAGE_SZ)
-                salt = page1[:SALT_SZ].hex()
-                db_files.append((rel, path, sz, salt, page1))
-                if salt not in salt_to_dbs:
-                    salt_to_dbs[salt] = []
-                salt_to_dbs[salt].append(rel)
-
-    print(f"\n找到 {len(db_files)} 个数据库, {len(salt_to_dbs)} 个不同的salt")
-    for salt_hex, dbs in sorted(salt_to_dbs.items(), key=lambda x: len(x[1]), reverse=True):
-        print(f"  salt {salt_hex}: {', '.join(dbs)}")
-
-    # 2. 打开所有微信进程
-    pids = get_pids()
-
-    hex_re = re.compile(b"x'([0-9a-fA-F]{64,192})'")
-    key_map = {}  # salt_hex -> enc_key_hex
-    remaining_salts = set(salt_to_dbs.keys())
-    all_hex_matches = 0
-    t0 = time.time()
-
-    for proc_idx, (pid, mem) in enumerate(pids):
-        h = kernel32.OpenProcess(0x0010 | 0x0400, False, pid)
-        if not h:
-            print(f"[WARN] 无法打开进程 PID={pid}，跳过")
-            continue
-
-        try:
-            regions = enum_regions(h)
-            total_bytes = sum(s for _,s in regions)
-            total_mb = total_bytes/1024/1024
-            print(f"\n[*] 扫描 PID={pid} ({total_mb:.0f}MB, {len(regions)} 区域)")
-
-            scanned_bytes = 0
-            for reg_idx, (base, size) in enumerate(regions):
-                data = read_mem(h, base, size)
-                scanned_bytes += size
-                if not data: continue
-
-                for m in hex_re.finditer(data):
-                    hex_str = m.group(1).decode()
-                    addr = base + m.start()
-                    all_hex_matches += 1
-                    hex_len = len(hex_str)
-
-                    if hex_len == 96:
-                        enc_key_hex = hex_str[:64]
-                        salt_hex = hex_str[64:]
-
-                        if salt_hex in remaining_salts:
-                            enc_key = bytes.fromhex(enc_key_hex)
-                            for rel, path, sz, s, page1 in db_files:
-                                if s == salt_hex:
-                                    if verify_key_for_db(enc_key, page1):
-                                        key_map[salt_hex] = enc_key_hex
-                                        remaining_salts.discard(salt_hex)
-                                        dbs = salt_to_dbs[salt_hex]
-                                        print(f"\n  [FOUND] salt={salt_hex}")
-                                        print(f"    enc_key={enc_key_hex}")
-                                        print(f"    PID={pid} 地址: 0x{addr:016X}")
-                                        print(f"    数据库: {', '.join(dbs)}")
-                                    break
-
-                    elif hex_len == 64:
-                        if not remaining_salts:
-                            continue
-                        enc_key_hex = hex_str
-                        enc_key = bytes.fromhex(enc_key_hex)
-                        for rel, path, sz, salt_hex_db, page1 in db_files:
-                            if salt_hex_db in remaining_salts:
-                                if verify_key_for_db(enc_key, page1):
-                                    key_map[salt_hex_db] = enc_key_hex
-                                    remaining_salts.discard(salt_hex_db)
-                                    dbs = salt_to_dbs[salt_hex_db]
-                                    print(f"\n  [FOUND] salt={salt_hex_db}")
-                                    print(f"    enc_key={enc_key_hex}")
-                                    print(f"    PID={pid} 地址: 0x{addr:016X}")
-                                    print(f"    数据库: {', '.join(dbs)}")
-                                    break
-
-                    elif hex_len > 96 and hex_len % 2 == 0:
-                        enc_key_hex = hex_str[:64]
-                        salt_hex = hex_str[-32:]
-
-                        if salt_hex in remaining_salts:
-                            enc_key = bytes.fromhex(enc_key_hex)
-                            for rel, path, sz, s, page1 in db_files:
-                                if s == salt_hex:
-                                    if verify_key_for_db(enc_key, page1):
-                                        key_map[salt_hex] = enc_key_hex
-                                        remaining_salts.discard(salt_hex)
-                                        dbs = salt_to_dbs[salt_hex]
-                                        print(f"\n  [FOUND] salt={salt_hex} (long hex {hex_len})")
-                                        print(f"    enc_key={enc_key_hex}")
-                                        print(f"    PID={pid} 地址: 0x{addr:016X}")
-                                        print(f"    数据库: {', '.join(dbs)}")
-                                    break
-
-                if (reg_idx + 1) % 200 == 0:
-                    elapsed = time.time() - t0
-                    progress = scanned_bytes / total_bytes * 100 if total_bytes else 100
-                    print(f"  [{progress:.1f}%] {len(key_map)}/{len(salt_to_dbs)} salts matched, "
-                          f"{all_hex_matches} hex patterns, {elapsed:.1f}s")
-        finally:
-            kernel32.CloseHandle(h)
-
-        # 所有 salt 都找到了就提前退出
-        if not remaining_salts:
-            print(f"\n[+] 所有密钥已找到，跳过剩余进程")
-            break
-
-    elapsed = time.time() - t0
-    print(f"\n扫描完成: {elapsed:.1f}s, {len(pids)} 个进程, {all_hex_matches} hex模式")
-
-    # 4. 如果有未找到的salt，用已找到的key做交叉验证
-    # (WCDB有时对同一passphrase的不同DB用同一enc_key，如果salt相同)
-    missing_salts = set(salt_to_dbs.keys()) - set(key_map.keys())
-    if missing_salts and key_map:
-        print(f"\n还有 {len(missing_salts)} 个salt未匹配，尝试交叉验证...")
-        for salt_hex in list(missing_salts):
-            for rel, path, sz, s, page1 in db_files:
-                if s == salt_hex:
-                    for known_salt, known_key_hex in key_map.items():
-                        enc_key = bytes.fromhex(known_key_hex)
-                        if verify_key_for_db(enc_key, page1):
-                            key_map[salt_hex] = known_key_hex
-                            print(f"  [CROSS] salt={salt_hex} 可用 key from salt={known_salt}")
-                            missing_salts.discard(salt_hex)
-                    break
-
-    # 5. 输出结果
-    print(f"\n{'='*60}")
-    print(f"结果: {len(key_map)}/{len(salt_to_dbs)} salts 找到密钥")
-
-    result = {}
-    for rel, path, sz, salt_hex, page1 in db_files:
-        if salt_hex in key_map:
-            result[rel] = {
-                "enc_key": key_map[salt_hex],
-                "salt": salt_hex,
-                "size_mb": round(sz/1024/1024, 1)
-            }
-            print(f"  OK: {rel} ({sz/1024/1024:.1f}MB)")
-        else:
-            print(f"  MISSING: {rel} (salt={salt_hex})")
-
-    if not result:
-        print(f"\n[!] 未提取到任何密钥，保留已有的 {OUT_FILE}（如存在）")
-        raise RuntimeError("未能从任何微信进程中提取到密钥")
-
-    # 写入密钥并记录对应的 db_dir，防止切换账号后误复用
-    result["_db_dir"] = DB_DIR
-    with open(OUT_FILE, 'w') as f:
-        json.dump(result, f, indent=2)
-    print(f"\n密钥保存到: {OUT_FILE}")
-
-    missing = [rel for rel, path, sz, salt_hex, page1 in db_files if salt_hex not in key_map]
-    if missing:
-        print(f"\n未找到密钥的数据库:")
-        for rel in missing:
-            print(f"  {rel}")
 
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     try:
         main()
-    except RuntimeError as e:
+    except RuntimeError as exc:
-        print(f"\n[ERROR] {e}")
+        print(f"\n[ERROR] {exc}")
         sys.exit(1)

find_all_keys_linux.py

@@ -0,0 +1,297 @@
+"""
+Linux 版微信数据库密钥提取
+
+原理: 与 Windows/macOS 相同 — 扫描微信进程内存，查找
+WCDB 缓存的 x'<64hex_enc_key><32hex_salt>' 模式，
+通过匹配数据库 salt + HMAC 校验确认密钥。
+
+读取方式: /proc/<pid>/maps + /proc/<pid>/mem
+权限要求: root 或 CAP_SYS_PTRACE
+"""
+import functools
+import hashlib
+import hmac as hmac_mod
+import json
+import os
+import re
+import struct
+import sys
+import time
+
+print = functools.partial(print, flush=True)
+
+PAGE_SZ = 4096
+KEY_SZ = 32
+SALT_SZ = 16
+
+from config import load_config
+_cfg = load_config()
+DB_DIR = _cfg["db_dir"]
+OUT_FILE = _cfg["keys_file"]
+
+
+def _safe_readlink(path):
+    try:
+        return os.path.realpath(os.readlink(path))
+    except OSError:
+        return ""
+
+
+def get_pids():
+    """返回所有疑似微信主进程的 (pid, rss_kb) 列表，按内存降序。"""
+    pids = []
+    for pid_str in os.listdir("/proc"):
+        if not pid_str.isdigit():
+            continue
+        pid = int(pid_str)
+        try:
+            with open(f"/proc/{pid}/comm") as f:
+                comm = f.read().strip()
+            with open(f"/proc/{pid}/statm") as f:
+                rss_pages = int(f.read().split()[1])
+            rss_kb = rss_pages * 4
+            exe_name = os.path.basename(_safe_readlink(f"/proc/{pid}/exe")) or comm
+            haystack = " ".join((comm, exe_name)).lower()
+            if "wechat" not in haystack and "weixin" not in haystack:
+                continue
+            pids.append((pid, rss_kb))
+        except (PermissionError, FileNotFoundError, ProcessLookupError):
+            continue
+
+    if not pids:
+        raise RuntimeError("未检测到 Linux 微信进程")
+
+    pids.sort(key=lambda item: item[1], reverse=True)
+    for pid, rss_kb in pids:
+        exe_path = _safe_readlink(f"/proc/{pid}/exe")
+        print(f"[+] WeChat PID={pid} ({rss_kb // 1024}MB) {exe_path}")
+    return pids
+
+
+def _get_readable_regions(pid):
+    """解析 /proc/<pid>/maps，返回可读内存区域列表。"""
+    regions = []
+    with open(f"/proc/{pid}/maps") as f:
+        for line in f:
+            parts = line.split()
+            if len(parts) < 2:
+                continue
+            if "r" not in parts[1]:
+                continue
+            start_s, end_s = parts[0].split("-")
+            start = int(start_s, 16)
+            size = int(end_s, 16) - start
+            if 0 < size < 500 * 1024 * 1024:
+                regions.append((start, size))
+    return regions
+
+
+def _collect_db_files():
+    db_files = []
+    salt_to_dbs = {}
+    for root, dirs, files in os.walk(DB_DIR):
+        for name in files:
+            if not name.endswith(".db") or name.endswith("-wal") or name.endswith("-shm"):
+                continue
+            path = os.path.join(root, name)
+            size = os.path.getsize(path)
+            if size < PAGE_SZ:
+                continue
+            with open(path, "rb") as f:
+                page1 = f.read(PAGE_SZ)
+            rel = os.path.relpath(path, DB_DIR)
+            salt = page1[:SALT_SZ].hex()
+            db_files.append((rel, path, size, salt, page1))
+            salt_to_dbs.setdefault(salt, []).append(rel)
+    return db_files, salt_to_dbs
+
+
+def _verify_enc_key(enc_key, db_page1):
+    salt = db_page1[:SALT_SZ]
+    mac_salt = bytes(b ^ 0x3A for b in salt)
+    mac_key = hashlib.pbkdf2_hmac("sha512", enc_key, mac_salt, 2, dklen=KEY_SZ)
+    hmac_data = db_page1[SALT_SZ: PAGE_SZ - 80 + 16]
+    stored_hmac = db_page1[PAGE_SZ - 64: PAGE_SZ]
+    hm = hmac_mod.new(mac_key, hmac_data, hashlib.sha512)
+    hm.update(struct.pack("<I", 1))
+    return hm.digest() == stored_hmac
+
+
+def main():
+    print("=" * 60)
+    print("  提取 Linux 微信数据库密钥（内存扫描）")
+    print("=" * 60)
+
+    # 1. 收集 DB 文件和 salt
+    db_files, salt_to_dbs = _collect_db_files()
+    if not db_files:
+        raise RuntimeError(f"在 {DB_DIR} 未找到可解密的 .db 文件")
+
+    print(f"\n找到 {len(db_files)} 个数据库, {len(salt_to_dbs)} 个不同的 salt")
+    for salt_hex, dbs in sorted(salt_to_dbs.items(), key=lambda x: len(x[1]), reverse=True):
+        print(f"  salt {salt_hex}: {', '.join(dbs)}")
+
+    # 2. 找到微信进程
+    pids = get_pids()
+
+    hex_re = re.compile(rb"x'([0-9a-fA-F]{64,192})'")
+    key_map = {}  # salt_hex -> enc_key_hex
+    remaining_salts = set(salt_to_dbs.keys())
+    all_hex_matches = 0
+    t0 = time.time()
+
+    for pid, rss_kb in pids:
+        try:
+            regions = _get_readable_regions(pid)
+        except PermissionError:
+            print(f"[WARN] 无法读取 /proc/{pid}/maps，权限不足，跳过")
+            continue
+
+        total_bytes = sum(s for _, s in regions)
+        total_mb = total_bytes / 1024 / 1024
+        print(f"\n[*] 扫描 PID={pid} ({total_mb:.0f}MB, {len(regions)} 区域)")
+
+        scanned_bytes = 0
+        try:
+            mem = open(f"/proc/{pid}/mem", "rb")
+        except PermissionError:
+            print(f"[WARN] 无法打开 /proc/{pid}/mem，权限不足，跳过")
+            continue
+
+        try:
+            for reg_idx, (base, size) in enumerate(regions):
+                try:
+                    mem.seek(base)
+                    data = mem.read(size)
+                except (OSError, ValueError):
+                    continue
+                scanned_bytes += len(data)
+
+                for m in hex_re.finditer(data):
+                    hex_str = m.group(1).decode()
+                    addr = base + m.start()
+                    all_hex_matches += 1
+                    hex_len = len(hex_str)
+
+                    if hex_len == 96:
+                        enc_key_hex = hex_str[:64]
+                        salt_hex = hex_str[64:]
+
+                        if salt_hex in remaining_salts:
+                            enc_key = bytes.fromhex(enc_key_hex)
+                            for rel, path, sz, s, page1 in db_files:
+                                if s == salt_hex and _verify_enc_key(enc_key, page1):
+                                    key_map[salt_hex] = enc_key_hex
+                                    remaining_salts.discard(salt_hex)
+                                    dbs = salt_to_dbs[salt_hex]
+                                    print(f"\n  [FOUND] salt={salt_hex}")
+                                    print(f"    enc_key={enc_key_hex}")
+                                    print(f"    PID={pid} 地址: 0x{addr:016X}")
+                                    print(f"    数据库: {', '.join(dbs)}")
+                                    break
+
+                    elif hex_len == 64:
+                        if not remaining_salts:
+                            continue
+                        enc_key_hex = hex_str
+                        enc_key = bytes.fromhex(enc_key_hex)
+                        for rel, path, sz, salt_hex_db, page1 in db_files:
+                            if salt_hex_db in remaining_salts and _verify_enc_key(enc_key, page1):
+                                key_map[salt_hex_db] = enc_key_hex
+                                remaining_salts.discard(salt_hex_db)
+                                dbs = salt_to_dbs[salt_hex_db]
+                                print(f"\n  [FOUND] salt={salt_hex_db}")
+                                print(f"    enc_key={enc_key_hex}")
+                                print(f"    PID={pid} 地址: 0x{addr:016X}")
+                                print(f"    数据库: {', '.join(dbs)}")
+                                break
+
+                    elif hex_len > 96 and hex_len % 2 == 0:
+                        enc_key_hex = hex_str[:64]
+                        salt_hex = hex_str[-32:]
+
+                        if salt_hex in remaining_salts:
+                            enc_key = bytes.fromhex(enc_key_hex)
+                            for rel, path, sz, s, page1 in db_files:
+                                if s == salt_hex and _verify_enc_key(enc_key, page1):
+                                    key_map[salt_hex] = enc_key_hex
+                                    remaining_salts.discard(salt_hex)
+                                    dbs = salt_to_dbs[salt_hex]
+                                    print(f"\n  [FOUND] salt={salt_hex} (long hex {hex_len})")
+                                    print(f"    enc_key={enc_key_hex}")
+                                    print(f"    PID={pid} 地址: 0x{addr:016X}")
+                                    print(f"    数据库: {', '.join(dbs)}")
+                                    break
+
+                if (reg_idx + 1) % 200 == 0:
+                    elapsed = time.time() - t0
+                    progress = scanned_bytes / total_bytes * 100 if total_bytes else 100
+                    print(
+                        f"  [{progress:.1f}%] {len(key_map)}/{len(salt_to_dbs)} salts matched, "
+                        f"{all_hex_matches} hex patterns, {elapsed:.1f}s"
+                    )
+        finally:
+            mem.close()
+
+        if not remaining_salts:
+            print(f"\n[+] 所有密钥已找到，跳过剩余进程")
+            break
+
+    elapsed = time.time() - t0
+    print(f"\n扫描完成: {elapsed:.1f}s, {len(pids)} 个进程, {all_hex_matches} hex 模式")
+
+    # 交叉验证：用已找到的 key 尝试未匹配的 salt
+    missing_salts = set(salt_to_dbs.keys()) - set(key_map.keys())
+    if missing_salts and key_map:
+        print(f"\n还有 {len(missing_salts)} 个 salt 未匹配，尝试交叉验证...")
+        for salt_hex in list(missing_salts):
+            for rel, path, sz, s, page1 in db_files:
+                if s == salt_hex:
+                    for known_salt, known_key_hex in key_map.items():
+                        enc_key = bytes.fromhex(known_key_hex)
+                        if _verify_enc_key(enc_key, page1):
+                            key_map[salt_hex] = known_key_hex
+                            print(f"  [CROSS] salt={salt_hex} 可用 key from salt={known_salt}")
+                            missing_salts.discard(salt_hex)
+                    break
+
+    # 输出结果
+    print(f"\n{'=' * 60}")
+    print(f"结果: {len(key_map)}/{len(salt_to_dbs)} salts 找到密钥")
+
+    result = {}
+    for rel, path, sz, salt_hex, page1 in db_files:
+        if salt_hex in key_map:
+            result[rel] = {
+                "enc_key": key_map[salt_hex],
+                "salt": salt_hex,
+                "size_mb": round(sz / 1024 / 1024, 1)
+            }
+            print(f"  OK: {rel} ({sz / 1024 / 1024:.1f}MB)")
+        else:
+            print(f"  MISSING: {rel} (salt={salt_hex})")
+
+    if not result:
+        print(f"\n[!] 未提取到任何密钥，保留已有的 {OUT_FILE}（如存在）")
+        raise RuntimeError("未能从任何微信进程中提取到密钥")
+
+    result["_db_dir"] = DB_DIR
+    result["_platform"] = "linux"
+    result["_key_source"] = "memory_scan"
+    with open(OUT_FILE, 'w', encoding='utf-8') as f:
+        json.dump(result, f, indent=2, ensure_ascii=False)
+    print(f"\n密钥保存到: {OUT_FILE}")
+
+    missing = [rel for rel, path, sz, salt_hex, page1 in db_files if salt_hex not in key_map]
+    if missing:
+        print(f"\n未找到密钥的数据库:")
+        for rel in missing:
+            print(f"  {rel}")
+
+
+if __name__ == "__main__":
+    try:
+        main()
+    except RuntimeError as exc:
+        print(f"\n[ERROR] {exc}")
+        sys.exit(1)

find_all_keys_windows.py

@@ -0,0 +1,276 @@
+"""
+从微信进程内存中提取所有数据库的缓存raw key
+
+WCDB为每个DB缓存: x'<64hex_enc_key><32hex_salt>'
+salt嵌在hex字符串中，可以直接匹配DB文件的salt
+"""
+import ctypes
+import ctypes.wintypes as wt
+import struct, os, sys, hashlib, time, re, json
+import hmac as hmac_mod
+from Crypto.Cipher import AES
+
+import functools
+print = functools.partial(print, flush=True)
+
+kernel32 = ctypes.windll.kernel32
+MEM_COMMIT = 0x1000
+READABLE = {0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80}
+PAGE_SZ = 4096
+KEY_SZ = 32
+SALT_SZ = 16
+
+from config import load_config
+_cfg = load_config()
+DB_DIR = _cfg["db_dir"]
+OUT_FILE = _cfg["keys_file"]
+
+
+class MBI(ctypes.Structure):
+    _fields_ = [
+        ("BaseAddress", ctypes.c_uint64), ("AllocationBase", ctypes.c_uint64),
+        ("AllocationProtect", wt.DWORD), ("_pad1", wt.DWORD),
+        ("RegionSize", ctypes.c_uint64), ("State", wt.DWORD),
+        ("Protect", wt.DWORD), ("Type", wt.DWORD), ("_pad2", wt.DWORD),
+    ]
+
+
+def get_pids():
+    """返回所有 Weixin.exe 进程的 (pid, mem_kb) 列表，按内存降序"""
+    import subprocess
+    r = subprocess.run(["tasklist", "/FI", "IMAGENAME eq Weixin.exe", "/FO", "CSV", "/NH"],
+                       capture_output=True, text=True)
+    pids = []
+    for line in r.stdout.strip().split('\n'):
+        if not line.strip():
+            continue
+        p = line.strip('"').split('","')
+        if len(p) >= 5:
+            pid = int(p[1])
+            mem = int(p[4].replace(',', '').replace(' K', '').strip() or '0')
+            pids.append((pid, mem))
+    if not pids:
+        raise RuntimeError("Weixin.exe 未运行")
+    pids.sort(key=lambda x: x[1], reverse=True)
+    for pid, mem in pids:
+        print(f"[+] Weixin.exe PID={pid} ({mem // 1024}MB)")
+    return pids
+
+
+def read_mem(h, addr, sz):
+    buf = ctypes.create_string_buffer(sz)
+    n = ctypes.c_size_t(0)
+    if kernel32.ReadProcessMemory(h, ctypes.c_uint64(addr), buf, sz, ctypes.byref(n)):
+        return buf.raw[:n.value]
+    return None
+
+
+def enum_regions(h):
+    regs = []
+    addr = 0
+    mbi = MBI()
+    while addr < 0x7FFFFFFFFFFF:
+        if kernel32.VirtualQueryEx(h, ctypes.c_uint64(addr), ctypes.byref(mbi), ctypes.sizeof(mbi)) == 0:
+            break
+        if mbi.State == MEM_COMMIT and mbi.Protect in READABLE and 0 < mbi.RegionSize < 500 * 1024 * 1024:
+            regs.append((mbi.BaseAddress, mbi.RegionSize))
+        nxt = mbi.BaseAddress + mbi.RegionSize
+        if nxt <= addr:
+            break
+        addr = nxt
+    return regs
+
+
+def verify_key_for_db(enc_key, db_page1):
+    """验证enc_key是否能解密这个DB的page 1"""
+    salt = db_page1[:SALT_SZ]
+
+    # HMAC验证 (最可靠)
+    mac_salt = bytes(b ^ 0x3a for b in salt)
+    mac_key = hashlib.pbkdf2_hmac("sha512", enc_key, mac_salt, 2, dklen=KEY_SZ)
+    hmac_data = db_page1[SALT_SZ: PAGE_SZ - 80 + 16]
+    stored_hmac = db_page1[PAGE_SZ - 64: PAGE_SZ]
+    h = hmac_mod.new(mac_key, hmac_data, hashlib.sha512)
+    h.update(struct.pack('<I', 1))
+    return h.digest() == stored_hmac
+
+
+def main():
+    print("=" * 60)
+    print("  提取所有微信数据库密钥")
+    print("=" * 60)
+
+    # 1. 收集所有DB文件及其salt
+    db_files = []
+    salt_to_dbs = {}
+
+    for root, dirs, files in os.walk(DB_DIR):
+        for f in files:
+            if f.endswith('.db') and not f.endswith('-wal') and not f.endswith('-shm'):
+                path = os.path.join(root, f)
+                rel = os.path.relpath(path, DB_DIR)
+                sz = os.path.getsize(path)
+                if sz < PAGE_SZ:
+                    continue
+                with open(path, 'rb') as fh:
+                    page1 = fh.read(PAGE_SZ)
+                salt = page1[:SALT_SZ].hex()
+                db_files.append((rel, path, sz, salt, page1))
+                salt_to_dbs.setdefault(salt, []).append(rel)
+
+    print(f"\n找到 {len(db_files)} 个数据库, {len(salt_to_dbs)} 个不同的salt")
+    for salt_hex, dbs in sorted(salt_to_dbs.items(), key=lambda x: len(x[1]), reverse=True):
+        print(f"  salt {salt_hex}: {', '.join(dbs)}")
+
+    # 2. 打开所有微信进程
+    pids = get_pids()
+
+    hex_re = re.compile(b"x'([0-9a-fA-F]{64,192})'")
+    key_map = {}
+    remaining_salts = set(salt_to_dbs.keys())
+    all_hex_matches = 0
+    t0 = time.time()
+
+    for pid, mem in pids:
+        h = kernel32.OpenProcess(0x0010 | 0x0400, False, pid)
+        if not h:
+            print(f"[WARN] 无法打开进程 PID={pid}，跳过")
+            continue
+
+        try:
+            regions = enum_regions(h)
+            total_bytes = sum(s for _, s in regions)
+            total_mb = total_bytes / 1024 / 1024
+            print(f"\n[*] 扫描 PID={pid} ({total_mb:.0f}MB, {len(regions)} 区域)")
+
+            scanned_bytes = 0
+            for reg_idx, (base, size) in enumerate(regions):
+                data = read_mem(h, base, size)
+                scanned_bytes += size
+                if not data:
+                    continue
+
+                for m in hex_re.finditer(data):
+                    hex_str = m.group(1).decode()
+                    addr = base + m.start()
+                    all_hex_matches += 1
+                    hex_len = len(hex_str)
+
+                    if hex_len == 96:
+                        enc_key_hex = hex_str[:64]
+                        salt_hex = hex_str[64:]
+
+                        if salt_hex in remaining_salts:
+                            enc_key = bytes.fromhex(enc_key_hex)
+                            for rel, path, sz, s, page1 in db_files:
+                                if s == salt_hex and verify_key_for_db(enc_key, page1):
+                                    key_map[salt_hex] = enc_key_hex
+                                    remaining_salts.discard(salt_hex)
+                                    dbs = salt_to_dbs[salt_hex]
+                                    print(f"\n  [FOUND] salt={salt_hex}")
+                                    print(f"    enc_key={enc_key_hex}")
+                                    print(f"    PID={pid} 地址: 0x{addr:016X}")
+                                    print(f"    数据库: {', '.join(dbs)}")
+                                    break
+
+                    elif hex_len == 64:
+                        if not remaining_salts:
+                            continue
+                        enc_key_hex = hex_str
+                        enc_key = bytes.fromhex(enc_key_hex)
+                        for rel, path, sz, salt_hex_db, page1 in db_files:
+                            if salt_hex_db in remaining_salts and verify_key_for_db(enc_key, page1):
+                                key_map[salt_hex_db] = enc_key_hex
+                                remaining_salts.discard(salt_hex_db)
+                                dbs = salt_to_dbs[salt_hex_db]
+                                print(f"\n  [FOUND] salt={salt_hex_db}")
+                                print(f"    enc_key={enc_key_hex}")
+                                print(f"    PID={pid} 地址: 0x{addr:016X}")
+                                print(f"    数据库: {', '.join(dbs)}")
+                                break
+
+                    elif hex_len > 96 and hex_len % 2 == 0:
+                        enc_key_hex = hex_str[:64]
+                        salt_hex = hex_str[-32:]
+
+                        if salt_hex in remaining_salts:
+                            enc_key = bytes.fromhex(enc_key_hex)
+                            for rel, path, sz, s, page1 in db_files:
+                                if s == salt_hex and verify_key_for_db(enc_key, page1):
+                                    key_map[salt_hex] = enc_key_hex
+                                    remaining_salts.discard(salt_hex)
+                                    dbs = salt_to_dbs[salt_hex]
+                                    print(f"\n  [FOUND] salt={salt_hex} (long hex {hex_len})")
+                                    print(f"    enc_key={enc_key_hex}")
+                                    print(f"    PID={pid} 地址: 0x{addr:016X}")
+                                    print(f"    数据库: {', '.join(dbs)}")
+                                    break
+
+                if (reg_idx + 1) % 200 == 0:
+                    elapsed = time.time() - t0
+                    progress = scanned_bytes / total_bytes * 100 if total_bytes else 100
+                    print(
+                        f"  [{progress:.1f}%] {len(key_map)}/{len(salt_to_dbs)} salts matched, "
+                        f"{all_hex_matches} hex patterns, {elapsed:.1f}s"
+                    )
+        finally:
+            kernel32.CloseHandle(h)
+
+        if not remaining_salts:
+            print(f"\n[+] 所有密钥已找到，跳过剩余进程")
+            break
+
+    elapsed = time.time() - t0
+    print(f"\n扫描完成: {elapsed:.1f}s, {len(pids)} 个进程, {all_hex_matches} hex模式")
+
+    missing_salts = set(salt_to_dbs.keys()) - set(key_map.keys())
+    if missing_salts and key_map:
+        print(f"\n还有 {len(missing_salts)} 个salt未匹配，尝试交叉验证...")
+        for salt_hex in list(missing_salts):
+            for rel, path, sz, s, page1 in db_files:
+                if s == salt_hex:
+                    for known_salt, known_key_hex in key_map.items():
+                        enc_key = bytes.fromhex(known_key_hex)
+                        if verify_key_for_db(enc_key, page1):
+                            key_map[salt_hex] = known_key_hex
+                            print(f"  [CROSS] salt={salt_hex} 可用 key from salt={known_salt}")
+                            missing_salts.discard(salt_hex)
+                    break
+
+    print(f"\n{'=' * 60}")
+    print(f"结果: {len(key_map)}/{len(salt_to_dbs)} salts 找到密钥")
+
+    result = {}
+    for rel, path, sz, salt_hex, page1 in db_files:
+        if salt_hex in key_map:
+            result[rel] = {
+                "enc_key": key_map[salt_hex],
+                "salt": salt_hex,
+                "size_mb": round(sz / 1024 / 1024, 1)
+            }
+            print(f"  OK: {rel} ({sz / 1024 / 1024:.1f}MB)")
+        else:
+            print(f"  MISSING: {rel} (salt={salt_hex})")
+
+    if not result:
+        print(f"\n[!] 未提取到任何密钥，保留已有的 {OUT_FILE}（如存在）")
+        raise RuntimeError("未能从任何微信进程中提取到密钥")
+
+    result["_db_dir"] = DB_DIR
+    with open(OUT_FILE, 'w') as f:
+        json.dump(result, f, indent=2)
+    print(f"\n密钥保存到: {OUT_FILE}")
+
+    missing = [rel for rel, path, sz, salt_hex, page1 in db_files if salt_hex not in key_map]
+    if missing:
+        print(f"\n未找到密钥的数据库:")
+        for rel in missing:
+            print(f"  {rel}")
+
+
+if __name__ == '__main__':
+    try:
+        main()
+    except RuntimeError as e:
+        print(f"\n[ERROR] {e}")
+        sys.exit(1)

key_utils.py

@@ -0,0 +1,29 @@
+import os
+
+
+def strip_key_metadata(keys):
+    """移除 all_keys.json 中以下划线开头的元数据字段。"""
+    return {k: v for k, v in keys.items() if not k.startswith("_")}
+
+
+def key_path_variants(rel_path):
+    """生成同一路径的多种分隔符表示，兼容 Windows/Linux JSON key。"""
+    normalized = rel_path.replace("\\", "/")
+    variants = []
+    for candidate in (
+        rel_path,
+        normalized,
+        normalized.replace("/", "\\"),
+        normalized.replace("/", os.sep),
+    ):
+        if candidate not in variants:
+            variants.append(candidate)
+    return variants
+
+
+def get_key_info(keys, rel_path):
+    """按相对路径查找数据库密钥，自动兼容不同平台分隔符。"""
+    for candidate in key_path_variants(rel_path):
+        if candidate in keys and not candidate.startswith("_"):
+            return keys[candidate]
+    return None

main.py

@@ -11,6 +11,8 @@ import sys
 import functools
 print = functools.partial(print, flush=True)
 
+from key_utils import strip_key_metadata
+
 
 def check_wechat_running():
     """检查微信是否在运行，返回 True/False"""
@@ -37,6 +39,7 @@ def ensure_keys(keys_file, db_dir):
             print(f"    旧: {saved_dir}")
             print(f"    新: {db_dir}")
             keys = {}
+        keys = strip_key_metadata(keys)
         if keys:
             print(f"[+] 已有 {len(keys)} 个数据库密钥")
             return
@@ -60,7 +63,7 @@ def ensure_keys(keys_file, db_dir):
             keys = json.load(f)
     except (json.JSONDecodeError, ValueError):
         keys = {}
-    if not keys:
+    if not strip_key_metadata(keys):
         print("[!] 未能提取到任何密钥")
         print("    可能原因：选择了错误的微信数据目录，或微信需要重启")
         print("    请检查 config.json 中的 db_dir 是否与当前登录的微信账号匹配")
@@ -79,7 +82,7 @@ def main():
 
     # 2. 检查微信进程
     if not check_wechat_running():
-        print("[!] 未检测到微信进程 (Weixin.exe)")
+        print(f"[!] 未检测到微信进程 ({cfg.get('wechat_process', 'WeChat')})")
         print("    请先启动微信并登录，然后重新运行")
         sys.exit(1)
     print("[+] 微信进程运行中")

mcp_server.py

@@ -12,6 +12,7 @@ from Crypto.Cipher import AES
 from mcp.server.fastmcp import FastMCP
 import zstandard as zstd
 from decode_image import ImageResolver
+from key_utils import get_key_info, key_path_variants, strip_key_metadata
 
 # ============ 加密常量 ============
 PAGE_SZ = 4096
@@ -50,7 +51,7 @@ elif not os.path.isabs(DECODED_IMAGE_DIR):
     DECODED_IMAGE_DIR = os.path.join(SCRIPT_DIR, DECODED_IMAGE_DIR)
 
 with open(KEYS_FILE) as f:
-    ALL_KEYS = json.load(f)
+    ALL_KEYS = strip_key_metadata(json.load(f))
 
 # ============ 解密函数 ============
 
@@ -149,7 +150,7 @@ class DBCache:
             tmp_path = info["path"]
             if not os.path.exists(tmp_path):
                 continue
-            rel_path = rel_key.replace('/', os.sep)
+            rel_path = rel_key.replace('\\', os.sep)
             db_path = os.path.join(DB_DIR, rel_path)
             wal_path = db_path + "-wal"
             try:
@@ -175,9 +176,10 @@ class DBCache:
             pass
 
     def get(self, rel_key):
-        if rel_key not in ALL_KEYS:
+        key_info = get_key_info(ALL_KEYS, rel_key)
+        if not key_info:
             return None
-        rel_path = rel_key.replace('/', os.sep)
+        rel_path = rel_key.replace('\\', '/').replace('/', os.sep)
         db_path = os.path.join(DB_DIR, rel_path)
         wal_path = db_path + "-wal"
         if not os.path.exists(db_path):
@@ -195,7 +197,7 @@ class DBCache:
                 return c_path
 
         tmp_path = self._cache_path(rel_key)
-        enc_key = bytes.fromhex(ALL_KEYS[rel_key]["enc_key"])
+        enc_key = bytes.fromhex(key_info["enc_key"])
         full_decrypt(db_path, tmp_path, enc_key)
         if os.path.exists(wal_path):
             decrypt_wal(wal_path, tmp_path, enc_key)
@@ -248,7 +250,7 @@ def get_contact_names():
             pass
 
     # 实时解密
-    path = _cache.get("contact/contact.db")
+    path = _cache.get("contact\\contact.db")
     if path:
         try:
             _contact_names, _contact_full = _load_contacts_from(path)
@@ -332,7 +334,8 @@ def _parse_message_content(content, local_type, is_group):
 # 消息 DB 的 rel_keys（排除 fts/resource/media/biz）
 MSG_DB_KEYS = sorted([
     k for k in ALL_KEYS
-    if k.startswith("message/message_") and k.endswith(".db")
+    if any(v.startswith("message/") for v in key_path_variants(k))
+    and any(v.endswith(".db") for v in key_path_variants(k))
     and "fts" not in k and "resource" not in k
 ])
 
@@ -379,7 +382,7 @@ def get_recent_sessions(limit: int = 20) -> str:
     Args:
         limit: 返回的会话数量，默认20
     """
-    path = _cache.get("session/session.db")
+    path = _cache.get("session\\session.db")
     if not path:
         return "错误: 无法解密 session.db"
 
@@ -635,7 +638,7 @@ def get_new_messages() -> str:
     """获取自上次调用以来的新消息。首次调用返回最近的会话状态。"""
     global _last_check_state
 
-    path = _cache.get("session/session.db")
+    path = _cache.get("session\\session.db")
     if not path:
         return "错误: 无法解密 session.db"
 

monitor.py

@@ -9,6 +9,7 @@ import hmac as hmac_mod
 from datetime import datetime
 from Crypto.Cipher import AES
 import zstandard as zstd
+from key_utils import get_key_info, strip_key_metadata
 
 _zstd_dctx = zstd.ZstdDecompressor()
 
@@ -149,9 +150,9 @@ def main():
 
     # 加载密钥
     with open(KEYS_FILE) as f:
-        keys = json.load(f)
+        keys = strip_key_metadata(json.load(f))
 
-    session_key_info = keys.get("session/session.db")
+    session_key_info = get_key_info(keys, os.path.join("session", "session.db"))
     if not session_key_info:
         print("[ERROR] 找不到session.db的密钥")
         sys.exit(1)

monitor_web.py

@@ -17,6 +17,7 @@ import urllib.parse
 import glob as glob_mod
 import zstandard as zstd
 from decode_image import extract_md5_from_packed_info, decrypt_dat_file, is_v2_format
+from key_utils import get_key_info, strip_key_metadata
 
 _zstd_dctx = zstd.ZstdDecompressor()
 
@@ -62,7 +63,7 @@ def _build_emoji_lookup(keys_dict):
     """从 emoticon.db 构建 emoji md5 → URL 映射（直接解密，不走 cache）"""
     global _emoji_lookup, _emoji_keys_dict, _emoji_last_refresh
     _emoji_keys_dict = keys_dict
-    key_info = keys_dict.get("emoticon/emoticon.db")
+    key_info = get_key_info(keys_dict, os.path.join("emoticon", "emoticon.db"))
     if not key_info:
         print("[emoji] 无 emoticon.db key，跳过", flush=True)
         return
@@ -254,13 +255,14 @@ class MonitorDBCache:
 
     def get(self, rel_key):
         """返回解密后的临时文件路径，mtime 变化时自动重新解密"""
-        if rel_key not in self.keys:
+        key_info = get_key_info(self.keys, rel_key)
+        if not key_info:
             return None
 
         lock = self._get_lock(rel_key)
         with lock:
-            enc_key = bytes.fromhex(self.keys[rel_key]["enc_key"])
+            enc_key = bytes.fromhex(key_info["enc_key"])
-            rel_path = rel_key.replace('/', os.sep)
+            rel_path = rel_key.replace('\\', '/').replace('/', os.sep)
             db_path = os.path.join(DB_DIR, rel_path)
             wal_path = db_path + "-wal"
 
@@ -273,7 +275,7 @@ class MonitorDBCache:
             except OSError:
                 return None
 
-            out_name = rel_key.replace('/', '_')
+            out_name = rel_key.replace('\\', '_').replace('/', '_')
             out_path = os.path.join(self.tmp_dir, out_name)
 
             prev = self._state.get(rel_key)
@@ -313,7 +315,7 @@ def build_username_db_map():
     # 先获取每个 DB 的 mtime 用于排序
     db_mtimes = {}
     for i in range(5):
-        rel_key = f"message/message_{i}.db"
+        rel_key = f"message\\message_{i}.db"
         db_path = os.path.join(DB_DIR, "message", f"message_{i}.db")
         try:
             db_mtimes[rel_key] = os.path.getmtime(db_path)
@@ -326,7 +328,7 @@ def build_username_db_map():
         db_path = os.path.join(decrypted_msg_dir, f"message_{i}.db")
         if not os.path.exists(db_path):
             continue
-        rel_key = f"message/message_{i}.db"
+        rel_key = f"message\\message_{i}.db"
         try:
             conn = sqlite3.connect(f"file:{db_path}?mode=ro", uri=True)
             for row in conn.execute("SELECT user_name FROM Name2Id").fetchall():
@@ -595,7 +597,7 @@ class SessionMonitor:
         #    local_id 不全局唯一，需要同时匹配 create_time
         file_md5 = None
         for _try in range(2):
-            res_path = self.db_cache.get("message/message_resource.db")
+            res_path = self.db_cache.get("message\\message_resource.db")
             if not res_path:
                 return None
             try:
@@ -620,7 +622,7 @@ class SessionMonitor:
             except Exception as e:
                 if 'malformed' in str(e) and _try == 0:
                     print(f"  [img] resource DB malformed, 强制刷新...", flush=True)
-                    self.db_cache.invalidate("message/message_resource.db")
+                    self.db_cache.invalidate("message\\message_resource.db")
                     continue
                 print(f"  [img] 查询 message_resource 失败: {e}", flush=True)
                 return None
@@ -753,10 +755,11 @@ class SessionMonitor:
 
     def _fresh_decrypt_query(self, db_key, table_name, prev_ts, curr_ts):
         """独立解密 message DB 到临时文件并查询，避免共享缓存竞态"""
-        if db_key not in self.db_cache.keys:
+        key_info = get_key_info(self.db_cache.keys, db_key)
+        if not key_info:
             return []
-        enc_key = bytes.fromhex(self.db_cache.keys[db_key]["enc_key"])
+        enc_key = bytes.fromhex(key_info["enc_key"])
-        rel_path = db_key.replace('/', os.sep)
+        rel_path = db_key.replace('\\', '/').replace('/', os.sep)
         db_path = os.path.join(DB_DIR, rel_path)
         wal_path = db_path + "-wal"
         if not os.path.exists(db_path):
@@ -1875,9 +1878,13 @@ def main():
     print("=" * 60, flush=True)
 
     with open(KEYS_FILE) as f:
-        keys = json.load(f)
+        keys = strip_key_metadata(json.load(f))
 
-    enc_key = bytes.fromhex(keys["session/session.db"]["enc_key"])
+    session_key_info = get_key_info(keys, os.path.join("session", "session.db"))
+    if not session_key_info:
+        print("[ERROR] 找不到 session.db 的密钥", flush=True)
+        sys.exit(1)
+    enc_key = bytes.fromhex(session_key_info["enc_key"])
     session_db = os.path.join(DB_DIR, "session", "session.db")
 
     print("加载联系人...", flush=True)
@@ -1910,10 +1917,10 @@ def main():
     def _warmup():
         try:
             t0 = time.perf_counter()
-            warmup_keys = ["message/message_resource.db"]
+            warmup_keys = ["message\\message_resource.db"]
             for i in range(5):
-                k = f"message/message_{i}.db"
+                k = f"message\\message_{i}.db"
-                if k in keys:
+                if get_key_info(keys, k):
                     warmup_keys.append(k)
             for k in warmup_keys:
                 t1 = time.perf_counter()